Setting The Controls; Selecting A Wash Cycle - Whirlpool 900 SERIES Use & Care Manual

Setting the Controls
Operating your dishwasher's controls properly helps you obtain the best possible washing
results. This section tells you how to select wash cycles and options.
Selecting a wash cycle
Press a Cycle pad. (Some cycles share the same pad.) Turn the cycle control knob to the
desired cycle.
A I'/" shows what each cycle includes CYCLE
MAIN
FINAL
TIME
CYCLE
WASH RINSE WASH RINSE RINSE DRY
(Minutes
POTS-N-PANS
Double wash for
maximum cleaning
of cooked-on or
baked-on foods.
J+ J J+ .' /++ J 76'
l
The water heats to 140°F (35°C) in
both washes (marked+).
l
The water heats to 140°F (35°C) in
the final rinse (markedn).
HEAVY
(on some models)
m!!
51 kZ$Z~tZvJpy
1
soiled loads.
J J J+ J /++ / 76'
l
Select Hi-Temp Wash to heat water
in the main wash (marked +).
l
The water heats to 140°F (35°C) in
the final rinse (markedw).
NORMAL
mill
Double wash for
.
.' 4
normal, everyday
soiled loads. (The
Energy Guide label J
is based on this cycle.)
J+ J 0 J 66*
l
Select Hi-Temp Wash to heat water
in the main wash (marked +).
l
The water heats to 140°F (35°C) in
the final rinse (marked ++).
* Cycle time includes dry time and may be longer depending on the temperature ot water entenng the cksnwasner. I ne cooler me
water, the longer the cycle time. If the water IS already hot enough, the cycle times ~111 be as shown. The cycle control knob does
not move while waler is being healed.
continued on next page
15