Setting The Controls; Selecting A Wash Cycle - Whirlpool 920 Series Use And Care Manual

Setting the Controls
Operating your dishwasher's controls properly helps you obtain the best possible washing
results. This section tells you how to select wash cycles and options.
Selecting a wash cycle
Press a Cycle pad. The dishwasher starts filling once you press a Cycle pad unless you
select the delav wash cvcle. You mav Dress Ootion Dads as the machine is fillina.
CYCLE
RINSEMIASH LATER
For rinsing a few items to
be washed one or more
days later.
l
Do not use detergent.
0 Water is not heated
during Rinse/Wash Later.
. Air Dry is automatically selected.
LOW ENERGY/CHINA
Single wash for prerinsed
or lightly soiled loads.
l
Select High Temp Wash
to heat water in the main
wash (marked +).
l
The water heats to 140°F (60°C) in
the final rinse (marked ++).
NORMAL
to heat water in the main wash
(marked +).
l
The water heats to 140°F (60°C) in
the final rinse (marked ++).
POTS-N-PANS
(marked +).
l
The water heats to 140°F (60°C) in
the final rinse (marked ++).
A "4
1" ,
show!
VASH IINSE
.
l t
.
vhat e
iiiiii
VASH
at
l t
at
:h cyc
IINSE
.
.
incluc
:INAL
IINSE
.
l tt
d-t
Ott
S
-
IR'Y
-
-
.
-
.
-
.
-
I
CYCLE
TIME
Minutes
12
60
76*
* Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher.
The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown. 13