Before Starting Your Dishwasher; Starting Your Dishwasher; Selecting A Cycle - Whirlpool DU1099XT1 Use & Care Manual

Before starting
your dishwasher
1. Read "Important Safety Instructions" on page
2 before starting your dishwasher.
2. Spin the Upper and Lower Spray Arms to
make sure nothing will stop them from turning
freely.
DRY SELECTOR SWITCH
W.m
/
DOOR LATCH
3. Push door firmly when closing and it will auto-
matically latch.
4. Run hot water at sink nearest dishwasher until
it is hot. Turn it off.
Starting your dishwasher
NORMAL WASH cycle...
1. Select a drying option.
2. Turn Cycle Control Knob clockwise to
dot marked NORMAL. The dishwasher
will automatically stad that cycle.
LIGHT WASH cycle...
I. Select a drying option.
2. Turn
Cycle
Control Knob clockwise
to dot marked LIGHT. The dishwasher
will automatically start that cycle.
Selecting a cycle
RINSE & HOLD cycle...
1. Select AIR DRY OPTION only.
2. Turn Cycle Control Knob clockwise
to dot marked RINSE & HOLD. The dish-
washer will automatically start that
cycle.
NORMAL WASH Cycle
A double wash for normal to heav-
ily soiled loads. [The Energy Guide
Label data is based on this cycle.]
Cycle time is about 65 minutes.