BWT Multi C Series Installation And Operating Manual page 5

StArt StArt StArt StArt StArt
26:45 26:45 26:45 26:45 26:45
z.B.
rEG rEG On On
rEG rEG On rEG On On
26:45 26:45 26:45
26:45 26:45
z.B.
rEG rEG rEG On rEG rEG On On On On
SEt SEt SEt
SEt SEt
4 4 4 4 4 08:32 08:32 08:32 08:32
08:32
Day of the week Day of the week Day of the week Day of the week Day of the week
I = Monday
2 = Tuesday
3 = Wednesday
etc. ....
z.B.
5 5 5 5 5 07:43 07:43 07:43
07:43 07:43
5 5 5 5 5 07:43 07:43 07:43
07:43 07:43
Star Star t-up t-up
Start-up Star Star t-up t-up
Insert mains plug. Insert mains plug. Insert mains plug. Insert mains plug. Insert mains plug.
Water supply must remain closed.
The display shows StArt StArt StArt StArt and then alternates between the capacity and StArt
day of the week (1-7) / time.
Allow basic fixing to finish (approx. 40 sec.) The running noise stops.
An automatic backwashing starts.
Slowly open the water supply to set the unit under pressure.
The display alternates between
remaining backwashing time in minutes (with a flashing symbol) remaining backwashing time remaining backwashing time remaining backwashing time remaining backwashing time
and rEG On rEG On rEG On rEG On rEG On
At the end of the bac At the end of the bac At the end of the backw At the end of the bac At the end of the bac kwashing the flushing w kw kw kw ashing the flushing w ashing the flushing water m ashing the flushing w ashing the flushing w
If it does not look clear, repeat the bac If it does not look clear If it does not look clear If it does not look clear If it does not look clear , repeat the bac , repeat the bac , repeat the bac , repeat the backw
Star Star Starting bac Star Star ting backw ting bac ting bac ting bac kw kw kwashing kw ashing ashing ashing ashing
Press about 4 sec. until the backwashing starts.
The display alternates between
remaining backwashing time remaining backwashing time
remaining backwashing time remaining backwashing time in minutes (with a flashing symbol) remaining backwashing time
and rEG On rEG On rEG On rEG On rEG On
Setting the time Setting the time
Setting the time Setting the time Setting the time
Flashing time can be changed
changes the numbers
moves the cursor
Set day of the week
The programming is complete. The unit is ready.
ater m ater must look clear ater m ater m ust look clear ust look clear ust look clear ust look clear. . . . .
kwashing. kw kw kw ashing. ashing. ashing. ashing.
15 15
15 15 15
GB