Settlng The Controls; Selecting A Wash Cycle - Whirlpool 927 Series Use And Care Manual

Setting the Controls
Operating your dishwasher's controls properly helps you obtain the best possible washing
results. This section tells you how to select wash cycles and options.
Selecting a wash cycle
Press a Cycle pad. The dishwasher starts filling once you press a cycle pad unless you
select the delay wash cycle. You may press Option pads as the machine is filling.
A "@" shows what each cycle includes
CYCLE
MAIN FINAL
TIME
CYCLE WASH RINSE WASH RINSE RINSE DRY
(Minutes
RINSE/WASH LATER
For rinsing a few items to
be washed one or more
days later.
. .
l
Do not use detergent.
12
l
Water is not heated
during Rinse/Wash Later.
. Air Dry is automatically selected.
LOW ENERGY/CHINA
Single wash for pre-rinsed
or lightly soiled loads.
l
Select High Temp Wash
to heat water in the main
wash.
. The water heats to 140°F (60°C) in
the final rinse.
.
. . .
60+
NORMAL
ii
Double wash for normal,
everyday soiled loads.
(The Energy Guide label is
. .
based on this cycle.)
. .
. . .
66+
l
Select High Temp Wash
to heat water in the main wash.
l
The water heats to 140°F (60°C) in
the final rinse.
POTS-N-PANS
i!ii
Double wash for maximum
cleaning of cooked-on or
-.
dried-on foods.
l
.
.
. . .
l
The water heats to 140°F
76+
.
(60%) in both washes.
l
The water heats to 140°F (60%) in
the final rinse.
+ Cycle time includes dry time and may be longer depending on Ihe temperature of water entering the dishwasher. The cuoler the
waler, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown.
14