Backyard Pro 554PL2026 Instruction Manual page 23

TROUBLE SHOOTING
PROBLEM POSSIBLE CAUSE PREVENTION/SOLUTION
Power
Temperature Dial
Igniter
Grill will NOT Start
Auger Motor
Control Board
Grill Temperature
when set at "P" Setting is too LOW
SMOKE is too high
Unexpected Grill Grill is exposed to high
Temperature is
ambient temperature
Displayed and direct sun�
Ensure unit is plugged in.
Verify there is power at the electrical outlet.
Check and reset the Ground Fault Interrupter, if necessary.
If igniter not working, check 5 amp fuse found on the back of
the control. Replace if necessary.
Ensure Temperature Dial is in "STAND BY" position. Turn
Temperature Dial to SMOKE.
LCD SCREEN will light up.
Remove Cooking Grids and Flavor/Grease Tray. Turn unit on
and visually inspect the igniter.
START UNIT USING MANUAL START INSTRUCTIONS. Call
Customer Service for replacement
Remove Cooking Grids and Flavor/Grease Tray. Turn unit on
and visually inspect the auger feed.
Remove Control Board and inspect the wires and
connections. If not working, Call Customer Service for
replacement Auger motor.
Remove Control Board and inspect the wires and
connections. If not working, Call Customer Service for
replacement Control Board.
Turn Temperature Dial to SMOKE, Pushing the "P" SETTING
Button to INCREASE the "P" setting.
The interior temperature has reached or gone over 130°F. It
will not harm the unit.
Place unit in shaded area�
Prop the lid open to reduce inside temperature.
23