Control Panel And Lcd Screen - Backyard Pro 554PL2026 Instruction Manual

OPERATION
OPERATION

Control Panel and LCD Screen

Control Panel and LCD Screen
Meat Probe TEMP Readout
Meat TEMP
Probe
Power Switch
LCD Screen
• LCD Screen
Displays Grill Temperature, "P" Setting, Igniter Status,
Displays Grill Temperature, "P" Setting, Igniter Status,
Timer Setting, and Temperature Status of Meat Probe.
Timer Setting, and Temperature Status of Meat Probe.
TEMP Control
Select the following: Smoke (low), High, or one of 8
• TEMP Control
different temperatures.
Button "P" for "P" Setting (Smoke
Select the following: Smoke (low), High, or one of 8
different temperatures.
Settings) and Manual Fuel Delivery
Select one of 8 temperature fine tunings (P0-P7).
• Button "P" for "P" Setting (Smoke
This allows for larger temperature control to fit
your cooking style.
Settings and Manual Fuel Delivery
"M" Timer/"M" for TEMP Set of Meat Probe
Timer Set: Cooking time ranging from 5 minutes
Select one of 8 temperature fine tunings (P0-P7).
to 12 hours can be set.
TEMP Set of Meat Probe: TEMP ranging from
This allows for larger temperature control to fit your
50 °F to 225 °F can be set for the Meat Probe.
cooking style.
Power Switch
Power ON/OFF
• "M" Timer/"M" for TEMP Set of Meat Probe
SMOKE Setting
Low temperature mode. 8 temperature fine tunings
Timer Set: Cooking time ranging from 5 minutes to 12
(P0-P7) are available for choice.
hours can be set�
Indication of Beeping Alerts
TEMP Set of Meat Probe: TEMP ranging from
1. A short beep for each push of a button and each dial of the TEMP Control.
50°F to 225°F can be set for the Meat Probe.
2. Repeated short beeps when pressing button "P" for manual feeding.
3. A continuous long beep when the MEAT PROBE detects it has reached the set temperature.
• Power Switch
4. Long beeps with short intervals between each when the temperature is lower than 120 °F. At this point,
Power ON/OFF
temperature readout will keep flashing. The beeps will go on for 10 minutes and will only disappear until it' s
powered off or manual method.
• SMOKE Setting
Low temperature mode. 8 temperature fine tunings
(P0-P7) are available for choice.
Indication of Beeping Alerts
1. A short beep for each push of a button and each dial of the TEMP Control.
2� Repeated short beeps when pressing button "P" for manual feeding.
3� A continuous long beep when the MEAT PROBE detects it has reached the set temperature.
4� Long beeps with short intervals between each when the temperature is lower than 120°F. At this point,
temperature readout will keep flashing. The beeps will go on for 10 minutes and will only disappear until it's
powered off or manual method.
Set TEMP Readout/Timer Readout
"P" / "M" Setting
14
"P" Setting Readout
LCD Screen
Actual TEMP
Readout
TEMP Control
High Temperature Mode
• High Temperature Mode
Grill operates at the highest heat level. When lid is
Grill operates at the highest heat level. When lid is
"Open", the grill will run at this speed.
"Open", the grill will run at this speed.
STAND BY
Starts the "Cool Down Cycle". All other parts stop
• STAND BY
working except for that the fan operated to cool down
Starts the "Cool Down Cycle". All other parts stop
the grill.
working except for that the fan operated to cool down
Holes for Meat Probes
the grill�
2 holes are available for Meat Probe 1 and Meat
Probe 2. Temperatures of both will be displayed on
the screen.
• Holes for Meat Probes
Flashing Dots
2 holes are available for Meat Probe 1 and Meat Probe
Indicates when the igniter is "ON".
2. Temperatures of both will be displayed on the
"ErH" Flashing Error
Grill temperature has exceeded 535 °F.
screen�
"ErP" Flashing Error
Temperature Dial was not in the STAND BY position
• Flashing Dots
when the grill was connected to power.
Indicates when the igniter is "ON". "ErR" Flashing Error
Grill Probe malfunction or disconnected from board.
• "ErH" Flashing Error
Grill temperature has exceeded 535°F.
• "ErP" Flashing Error
Temperature Dial was not in the STAND BY position
when the grill was connected to power.
• "ErR" Flashing Error
Grill Probe malfunction or disconnected from board
17