Backyard Pro 554PL2026 Instruction Manual page 11

PL2026 ASSEMBLY INSTRUCTIONS, STEPS 8-10
STEP 8
Assemble the stack (17) and gasket (16) to
the main body with 3 bolts (F) and 3 washers (G).
21
STEP 10
20
9
1. Place heat diffuser shield (18) over the fire cup
1. Place heat diffuser shield (18) over the fire cup
inside main body at the center of the grill.
inside main body at the center of the grill.
2. Place grease tray (19) into main body. The edge with
2� Place grease tray (19) into main body. The edge
cut out on the center should go into the grease channel.
3. Place cooking grates (20) into main body.
with cut out on the center should go into the
4. Place the warming racks (21) into main body.
grease channel�
3� Place cooking grates (20) into main body.
4� Place the warming racks (21) into main body.
16
17
G E
21
20
19
18
21
21
STEP 9
Attach the grease bucket (9).
20
20
19
19
18
18
TO USE:
1. Place a clean, empty bucket under the drop
chute�
2� Loosen and slide plate (H) fully out toward you.
Note: The hopper will not empty 100%. Hopper fuel
change out ensure slide plate (H) is secured in place.
9
J
H
11