1. Recommendations and Pre-requisites
You will need the installation kit provided with the StreamPunch Ultra/MP unit, which can be found in
•
the main carton.
Using a jogging unit on the finisher will improve the stack quality for binding purposes.
•
2. Unpacking
Inspect the outside of the package for shipping damage. If there is evidence of shipping damage,
•
contact the shipping carrier immediately.
Remove the punch from its shipping carton. Three people are recommended, one lifting at the casters
•
while two lift at the top cover. DO NOT lift using the front door panel.
Retain the smaller accessory box; it contains parts required for correct installation of the StreamPunch
•
Ultra/MP.
Inspect for any concealed damage to the unit. If there is evidence of concealed shipping damage,
•
contact the shipping carrier immediately.
Remove all shipping tape from doors and levers.
•
3. Configurations
StreamPunch Ultra can be installed with the below printer/finisher configurations:
Product
Project name
name
Pro C5300
Charis-C3 pro
Pro C5310
Pro 8300
Baron-C3
Pro 8310
Pro 8320
Pro C7200
Taurus-C3/C3.5
Pro C7210
Andromeda-
Pro C9200
P2/P2.5
Pro C9210
StreamPunch Ultra MP can be installed with the below printer/finisher configurations:
Product
Project name
name
MP 6503
Martini-C6
MP 7503
MP 9003
IM C6500
Charis-C3 office
IM C8000
Use communication cable 7718535
Peripheral
SR5110 / SR5120 / SK5040
SR5110 / SR5120 / SK5040
SR5050 / SR5060
SR5110 / SR5120 / SK5040
SR5050 / SR5060
SR5110 / SR5120 / SK5040
Peripheral
SR4080
SR4140
Ricoh StreamPunch Ultra/MP Installation Manual
Use communication cable 7715727
2