Final Steps - ACCO Brands GBC Ricoh StreamPunch Ultra Installation Manual

b)

8. Final Steps

8.1 Printer & Finisher Firmware
Confirm that the printer and finisher have the latest firmware installed. Firmware is available for download
at www.tscweb.net (US) or
contains the latest firmware can be accessed from the QR code below.
8.2 Enabling the Punch Icon
If the punch icon (shown below) for the Stream Punch Ultra/MP option does not appear on the operation
panel, follow the procedure below:
a) Shut down the printer.
b) Turn OFF of the main power switch located inside the front door of the printer
c) Wait for at least 10 seconds
d) Turn ON the main power switch.
e) Punch icon will appear on the printer screen.
https://www.my-ricoh.com/
Ricoh StreamPunch Ultra/MP Installation Manual
Using the 17mm (11/16") wrench, rotate the caster
stems to change the height.
Re-tighten the jam nuts once the correct height is
achieved.
(EU. The GBC service data portal that also
Punch Icon
10