Related Manuals for SEI San Santo TV/Media Stand MS834300TX
Summary of Contents for SEI San Santo TV/Media Stand MS834300TX
- Page 1 San Santo TV/Media Stand MS834300TX-Brown Mahogany For assistance with assembly contact: Southern Enterprises Inc. Assembly Instructions Customer Service 1-800-633-5096 service@seidal.com www.seidal.com PO:11740...
- Page 2 San Santo TV/Media Stand Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using hardware that is too long will cause damage. Before beginning assembly, separate each type of hardware. Carefully study the hardware diagrams below.
- Page 3 San Santo TV/Media Stand Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using hardware that is too long will cause damage. Before beginning assembly, separate each type of hardware. Carefully study the hardware diagrams below.
- Page 4 San Santo TV/Media Stand Assembly Instructions Assembly Instructions: Wood may scratch easily. Be careful when assembling. Do not scratch. Step 1. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated on the front page.
- Page 5 San Santo TV/Media Stand Assembly Instructions Step 1. Attach Lower Middle Panel(J) to the Bottom Panel(H) with Bolt(2) as pictured. Quantity of 2 Figure 4 1/4” x 1” Bolt Step 1. Insert the Wood Dowels(1) into predrilled holes in Bottom Frame(K) and Lower Middle Panel(J).
- Page 6 San Santo TV/Media Stand Assembly Instructions Step 1. Insert the Wood Dowels(1) into predrilled holes in Side Panels(F,G) and Upper Middle Panels(I) Step 2. Attach Top Panel(O) to the Side Panels(F,G) and Upper Middle Panel(I) with Bolt(2), then fasten them. Quantity of 6 8mm x 30 mm...
- Page 7 San Santo TV/Media Stand Assembly Instructions Step 1. Insert Nut(8) into predrilled holes on Drawer Face Panel(A). Step 2. Attach the Drawer Side Panels(B,C) to Drawer Face Panel(A) with Bolt for Drawer(9) through outer predrilled holes in Drawer Side Panels(B,C). Step 3.
- Page 8 San Santo TV/Media Stand Assembly Instructions Step 1. Attach Bracket(12) to the Side Panel(F,G) with Screw For Bracket(13). Step 2. Drill 1/4 pilot holes in near proximity of the Bracket(12) attached to the Side Panel(F,G) and tap the Plastic Anchor(14) into wall.
-
Page 9: Parts Replacement Form
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. - Page 10 CAUTION The top shelf is intended for a flat screen television with a maximum overall width of 50” and supports up to 175 lb. The top shelf is NOT INTENDED for tube televisions. Each center shelf should not be loaded with more than 20 lb. Each side shelf should not be loaded with more than 15 lb.
Need help?
Do you have a question about the San Santo TV/Media Stand MS834300TX and is the answer not in the manual?
Questions and answers