Table of Contents
Advertisement
Basics
Labels
Module instal-
lation
Module
removal
Rev. 05 - 2011 - B
A label is placed on the output module where you can write the information
regarding the configuration of the module.
Besides the information that you write on the label, the module type and part
number are also displayed on the label.
Note
The coloured part at the top of the label also informs you of the
module type. Each type of module is allocated a different coloured
label.
On one of the other sides of the module you will find a label with a bar code
printed on it.
You install an output module by sliding the module into a module slot in the
lower section of the headend unit and click it into place.
You release an output module from a slot by using the lock mechanism that
is placed to the right of the modules in the output section.
Move the lock mechanism slightly to release the module.
4
Advertisement
Table of Contents
