Status Led's; Configuration Of System - Triax COFDM User Manual

Basics

Status LED's

Configuration
of system
Rev. 05 - 2011 - B
There is a status LED on the front of each module. The LED indicates wheth-
er the module functions according to its purpose or fails.
Green - flashing
Green
Red
No colour
When you update the software of a module the status LED provides you with
information about the updating process.
Orange
Temporary off
Temporary green
Red
In order to set up and configure the input and output modules within the
headend system you have to connect your laptop (Windows based) to the
RJ45 socket on the main headend unit using a Cat5 cable.
The module has not been configured yet.
No errors and everything is valid.
Error.
Power has not been switched on.
Boot loader state.
Initiation of the software update.
Every time the modules receives a valid data package.
Repeated until the update is completed without errors.
Software update failed.
6