Delete Setup - Triax COFDM User Manual

Delete setup

Rev. 05 - 2011 - B
When you return to the Output window the configuration of the output mod-
ule is displayed in the module list.
Now you can continue to configure the other output modules one by one, fol-
lowing the procedure described on the previous pages.
If you want to remove an output module and the associated configuration
you can use the Delete button of the module in question in the Output win-
dow.
Click the Delete button of the COFDM output module you want to remove.
A message window is displayed asking you to confirm that you want to re-
move the output module.
Until you have removed the output module physically from the headend unit
the module list will display four lines with the writing in red.
TDX Service Tool
33