Create A New System Configuration - Triax COFDM User Manual

TDX Service Tool
Create a new
system config-
uration
Rev. 05 - 2011 - B
To create a new configuration, click the New configuration button in the Sys-
tem window.
Now a configuration file is created and the file is listed in the configuration list
area.
You can use the buttons below the configuration list area when you want to
change the existing configuration of your headend system.
Set active
Click this button when you want to activate a selected
configuration file.
New
Click this button to create a new configuration file.
Delete
Click this button to delete a selected configuration file.
Load to TDX Click this button to download a configuration file from
your computer/laptop to your TDX system. More informa-
tion about downloading, see "Load to TDX" on page 46.
Load from TDX
Click this button to upload the configuration file from the
TDX system to your computer/laptop. More information
about uploading, see "Load from TDX" on page 47.
To activate a new configuration file, select the file and click the Set active
button, and the Apply button to save the configuration file.
20