Basics
Labels
Cover removal
A label is placed on the input module where you can write the information re-
garding the configuration of the module.
Besides the information that you write on the label, the module type and part
number are also displayed on the label.
Note
The coloured part at the top of the label informs you of the mod-
ule type. Each type of module is allocated a unique coloured la-
bel.
On the bottom of the module you will find a label with the bar code and a se-
rial number printed on it.
Before you can install a DVB-S module in the input section you have to re-
move the cover that protects the module slot.
You do not need tools to remove the covers, just use your fingers.
For EMC and cooling reasons only remove covers from the module slots that
you want to insert modules into.
4