Page 1
In order to let customers understand Korenix product’s features and applications, Korenix demo box shows how to connect with JetPort, JetNet and JetCon. In the Demo box, Korenix organizes Korenix products for the best results, and impresses customers with not only product introduction, but also live demonstration.
3. Hardware Installation Below is the block diagram and step by step to construct your demo box. ¡ 3.1 5604:link JetNet2005 with two RJ-45 copper one in RTTD path 3.2 5601:link JetNet2005 with RJ-45 copper 3.3 5601f:link JetCon1301 with Fiber 3.4 JetCon1301:link JetNet2005 with RJ-45 copper 3.5 Card Reader: 3.6 Power On your Devices:...
JetPort commander is a windows utility which can help customers control JetPort series products convenient and quickly. Please install this utility in your PC first. You can find the new firmware and JetPort Commander in the CD or the Korenix web site. Korenix Web Site...
5. Demo Program 5.1 Virtual COM Establish a Vcom with JetPort Commander Open Windows hyper terminal and set baudrate:9600 Data bit:8 Parity:No Stop Bits:1 Swipe the Card and see the Data transfer...
Page 5
5.2 RTTD Primary Path: When the dual Ethernet ports are connected to different switches, only one path will be activated. Backup Path: The un-activated path will be the backup path. Auto-recovery: When the primary path is broken, the backup path will recover Ethernet connection in less than 200ms.