Important Safety Instructions - Pentair ChemCheck Installation And Service Manual

Water quality monitor
Table of Contents

Advertisement

ii
IMPORTANT NOTICE
This guide provides installation and operation instructions for this
product. Consult Pentair with any questions regarding this equipment.
Attention Installer: This guide contains important information about
the installation and safe use of this product. This information should be
given to the owner and/or operator of this equipment after installation or
left on or near the equipment.
Attention User: This manual contains important information that will
help you in operating and maintaining this product. Please retain it for
future reference.
READ AND FOLLOW
ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This is the safety alert symbol. When you see
this symbol on your system or in this manual,
look for one of the following signal words and
be alert to the potential for personal injury.
Warns about hazards that can cause death,
serious personal injury, or major property
damage if ignored.
Warns about hazards that may cause death,
serious personal injury, or major property
damage if ignored.
Warns about hazards that may or can cause
minor personal injury or property damage if
ignored.
NOTE
Indicates special instructions not related to
hazards.
Carefully read and follow all safety instructions in this manual and
on equipment. Keep safety labels in good condition; replace if
missing or damaged.
Before installing this product, read and follow all
warning notices and instructions in this Guide.
Failure to follow warnings and instructions can result in severe injury,
death, or property damage. Call (800) 831-7133 for additional free
copies of these instructions. Please refer to www.pentair.com for
more information related to this products.
Do not permit children to use this product.
SERIOUS BODILY INJURY OR DEATH CAN
RESULT IF THIS PRODUCT IS NOT INSTALLED
AND USED CORRECTLY.
INSTALLERS, POOL OPERATORS AND POOL
OWNERS MUST READ THESE WARNINGS AND
ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
RISK OF ELECTRICAL SHOCK OR
ELECTROCUTION! ALWAYS DISCONNECT
POWER TO THIS EQUIPMENT AT THE
CIRCUIT BREAKER BEFORE SERVICING.
FAILURE TO DO SO COULD RESULT IN
DEATH OR SERIOUS INJURY TO SERVICE
PERSON, POOL USERS OR OTHERS DUE TO ELECTRIC
SHOCK.
CHEMCHECK™ Water Quality Monitor Install and Service Guide

IMPORTANT SAFETY INSTRUCTIONS

Most states and local codes regulate the
construction, installation, and operation of public
pools and spas, and the construction of residential pools and spas. It is
important to comply with these codes, many of which directly regulate
the installation and use of this product. Consult your local building and
health codes for more information.
Before using your pool, spa or hot tub, check the
pH and sanitizer levels of the water.
When mixing acid with water, ALWAYS ADD
ACID TO WATER. NEVER ADD WATER TO
ACID. When adding any chemical to the pool/spa, be sure to follow
the manufacturer's instructions thoroughly.
CHEMICAL BURN HAZARD! Make sure all
pumps are switched off at the circuit breakers
before drilling into any pipes. Securely fasten all electrical, water and
chemical lines. Locate chemical feed pumps and chemical storage
tanks in a safe and secure area.
This product must be installed by a licensed
or certified electrician or a qualified pool
professional in accordance with the National Electrical Code (NEC),
NFPA 70 or the Canadian Electrical Code (CEC), CSA C22.2. All
applicable local installation codes and ordinances must also be
adhered to. Improper installation will create an electrical hazard
which could result in death or serious injury to pool users, installers
or others due to electrical shock, or may cause damage to property.
READ THE FOLLOWING BEFORE HANDLING
AND WORKING WITH MURIATIC ACID (ALSO
KNOWN AS HYDROCHLORIC ACID) AND
CHLORINE (SODIUM HYPOCHLORITE).
MURIATIC ACID AND CHLORINE (LIQUID
AND MIST) CAN CAUSE SEVERE BURNS TO SKIN, MOUTH
AND EYES. MAY BE FATAL IF SWALLOWED OR INHALED.
INHALATION CAN CAUSE SEVERE LUNG DAMAGE.
MIXING CHEMICALS WITH CHLORINE OR CHLORINE
RESIDUE IN CONTAINER CAN CREATE A DEADLY GAS OR
AN EXPLOSION. DO NOT MIX SODIUM HYPOCHLORITE AND
MURATIC ACID.
TAKE EXTREME CARE WHEN INSERTING THE ACID CONTAINER
INTO THE STORAGE TANK, AS THE FOIL SEAL MAY NOT BE
FULLY ATTACHED.
STRICTLY FOLLOW THE ACID MANUFACTURERS SAFETY AND
HANDLING PROTOCOLS INCLUDING HAND, BODY AND EYE
PROTECTION WHEN TRANSFERRING OR HANDLING ACID.
SAFETY PRECAUTIONS SHOULD BE USED WHEN HANDLING
MURIATIC ACID TO CONTROL PH WATER LEVELS. MURIATIC
ACID CAN CAUSE SERIOUS BODY INJURY AND DAMAGE
POOL EQUIPMENT. EXTRA CARE MUST BE TAKEN WHEN
INSTALLING, MAINTAINING AND OPERATING ACID PUMP FEED
SYSTEMS. ACID IS DANGEROUS TO HANDLE AND SHOULD BE
PROPERLY CONTAINED, TRANSPORTED, POURED, STORED,
AND DISPENSED.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents