Related Manuals for Draper 59085
Summary of Contents for Draper 59085
- Page 1 UNIVERSAL VALVE SPRING COMPRESSOR STOCK No.59085 PART No.VSC/UNI • INSTRUCTIONS • IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL. 01/2000...
- Page 2 INTRODUCTION Universal Valve Spring Compressor This tool has been designed specially for removing and installing valve springs and seals without the need to remove the cylinder head from the engine block. However it can also be used on a cylinder head which has been removed from the block. WARNING: Always wear safety goggles when using this tool.
- Page 3 8. Check that the valve adaptor lines up correctly Fig.4. with the valve holder. If the adaptor does not line up correctly, adjust the support bar, upright supports or compression handle/valve adaptor as necessary. 9. Once the valve adaptor is lined up correctly tighten the upright support bolts.
- Page 4 ©Published by Draper Tools Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the 59085 and is the answer not in the manual?
Questions and answers