Intended Use; Disposal; Introduction; Scope Of Delivery - Bosch SCD110 Operating Instructions Manual

SCD110 Operating Instructions v2.0

2.1 Intended Use

The SCD110 is designed for monitoring purposes and is not certified as a device to ensure functional
safety. The SCD is intended for the following application areas:
Environments
Please consider following operating conditions for the SCD110 device.
Operating temperature range
Recommended storage temperature
Humidity range
Validation and testing of any use or operation which requires specific requirements and/or standards
that not explicitly mentioned in this document is the customer's responsibility.
Warning: Restricted use!
The SCD shall not be used as an element of control and safety in machines or applications
under the scope of the Machinery Directive 2006/42/EC or other functional safety
regulation. Any incident on health to people and on environment can lead to liability and
criminal prosecution of the user.
Please see also the section 10.12 Restrictions of Use.

2.2 Disposal

Disposing of this product correctly will help save valuable resources and prevent any potential
negative effects to human health and the environment, which could otherwise arise from inappropriate
waste handling. Please contact a certified recycling company or the responsible local authority for
further details on your nearest designated collection point. Penalties may apply for incorrect disposal
of this waste, in accordance with your national legislation. For further information, please refer to the
section 10.11 Disposal.

3 Introduction

The SCD is a multi-sensor IoT device that measures acceleration, magnetic fields, temperature and
light. The robust housing, compact design and easy installation make it perfectly suitable for industrial
retrofit applications, such as condition monitoring and predictive maintenance. Configuring the device
enables the user to address a broad variety of use cases.

3.1 Scope of Delivery

The SCD110 will be delivered with the following combination. The devices are ready to use.

SCD110 device with built-in battery

Quick Start Guide

Packaging unit consists of 10 devices
Data subject not change without notice | Printed in Germany | September 20 | Version 1.0
Residential, commercial, light-industrial, and industrial
-20 °C ... +85 °C
+10 °C ... +30 °C
0% RH ... 100% RH
6 | 27
BCDS/GM