Intended Use; Safety Notes - Bosch Sense T Manual

Asset monitoring and tracking sensor
Table of Contents

Advertisement

Sense S | Sense T | Asset Monitoring and Tracking Sensor
10 | 11
Note:
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.

12 Intended Use

The Bosch Sense T and Sense S beacons are designed according to the information provided in section 3 of this
document. Any use or operation which requires specific requirements and standards which are not explicitly mentioned in
this document must be validated and tested on customer's own responsibility.
The housing of the Sense beacon is not to be opened or tampered with. The Sense beacon is designed for use within
environmental conditions as further detailed in the technical specifications in chapter 2. Any intent to use or operate the
product under deviating environmental conditions must be subjected to renewed validation and testing by the customer.
Neither the Sense nor a potential product derivation, are designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other
application in which the failure of the Bosch product could create a situation where personal injury or death may occur. The
same applies for any kind of weapon, or any device or application which is potentially dangerous to human life.
The Sense beacon is designed for monitoring and tracking purposes and shall not be used as an element of control and
safety in machines under the scope of the Machinery Directive 2006/42/EC.
Bosch Connected Industry shall not hold liable for any damages resulting from any use of the Sense beacon
outside/beyond the certified types of operation and/or defined field of application.
Radio frequency radiation exposure information: this equipment complies with the radiation exposure limits prescribed for
an uncontrolled environment for fixed and mobile use conditions.

13 Safety Notes

CAUTION: Lithium Battery!
The device contains a lithium battery. Handling the battery incorrectly could cause fire. Read and follow the valid
transportation regulations. Do not damage or cut the device.
Data subject not change without notice | Printed in Germany | May 23, 2018
Bosch Connected Industry

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sense s

Table of Contents