Cisco WLC 5700 Series Command Reference Manual page 36

show redundancy
Slave/Process ID =
Slave/Process ID =
Slave/Process ID =
Slave/Process ID =
Slave/Process ID =
Controller#
This example shows how to display information about the redundancy facility state:
Controller# show redundancy states
Redundancy Mode (Operational) = SSO
Redundancy Mode (Configured) = SSO
Communications = Down
client count = 75
client_notification_TMR = 360000 milliseconds
keep_alive threshold = 18
Controller#
High Availability Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series)
28
6109 Slave Name = [eicored]
6128 Slave Name = [snmp_subagent]
8897 Slave Name = [wcm]
8898 Slave Name = [table_mgr]
8901 Slave Name = [iosd]
my state = 13 -ACTIVE
peer state = 1 -DISABLED
Mode = Simplex
Unit ID = 1
Redundancy State = Non Redundant
Manual Swact = disabled (system is simplex (no peer unit))
Reason: Simplex mode
keep_alive TMR = 9000 milliseconds
keep_alive count = 0
RF debug mask = 0
High Availability Commands
OL-32317-01