Maintenance - Beko BFYH 500 User Manual

5

Maintenance

1. Make sure that the power of the air conditioner is turned off before the maintenance is to
be done.
2. Removal of the filter screen
1. Make sure that the operation of the air conditioner is fully stopped.
2. Remove the screws on both top sides of the bottom panel, hold both top sides of the bottom
panel, pull out in the direction of arrow to open the bottom panel.
3. The air filter screen is loaded inside the panel, take out the air filter screen.
3. Cleaning of the filter screen
Gently pat the screen or use a vacuum cleaner to do the cleaning. lf too much filth is accumulated
on the screen, a small amount of neutral detergent solution can be used for the cleaning. After the
cleaning, the screen must be dried in air and be put back into place.
C
Note: Do not place the air filter screen under the exposure of sunlight or near an
over to dry; do not use warm water above 40°C to do the cleaning so as to avoid
deformation.
4. Cleaning of the air conditioner
1. To ensure safety, power must be turned off before doing the cleaning, otherwise, it may cause
electric shocks.
2. Do not use water to flush the units.
3. Use a piece of soft dry cloth to clear off the dust on the units.
18 / 21 EN
Bottom
panel
Screws
Pull out
Split floor-standing air conditioner
/ User Manual