Philips SmartPro Active Manual page 23

3
Replacing the battery of the remote control
The remote control works on a CR2025 coin-shaped battery.
Replace the battery when the robot no longer responds when you press
the buttons on the remote control.
1
2
2
1
3
Ordering new dry wipes
You can order new dry wipes under order number CP0123.
Troubleshooting
This chapter summarises the most common problems you could
encounter with this appliance. If you are unable to solve the problem with
the information below, visit www.philips.com/support for a list of
frequently asked questions or contact the Consumer Care Centre in your
country.
Place the new rechargeable battery in the battery cavity and slide the
battery cavity cover back onto the robot.
Hold the remote control upside down. Push the release button on
the battery holder and at the same time slide the battery holder out
of the remote control.
Remove the empty battery from the battery holder and place a new
battery in the battery holder. Then slide the battery holder back into
the remote control.
ENGLISH
23