Norbord Shaped OPEN BASE Cabinets Assembly Manual

ASSEMBLY GUIDE
Panels
3
2
5
4
1 x 1 Narrow Back Panel
2
1 x Side
1 x 3 Top
1 x 4 Base
1 x 5 Shelf
Before you Start ...
WARNING: Installation should be performed by a competent person only. This product could
be dangerous if incorrectly installed. All assembly fittings except legs and shelf pegs have
been pre-inserted. If any are missing or there is a problem with the panels, please call the
Manufacturers' Helpline on 01769 575500, and their team will get things sorted.
Video assembly guides can be viewed at www.mycabinetguide.co.uk
Cleaning – Use mild soap and water only. Do not use abrasive cleaners.
Hardware
2 x
8 x
1
Please use scissors to open the
bag of fittings and then empty
the contents into a bowl, so
that they do not get lost!
Legs
2 x
2 x
Shaped
OPEN BASE
Cabinets
D
C
15mm
S
1 x U
T
1 x
V
Minimum Tools required
Cross Head Screwdriver
Hammer
Drill
3mm 5mm
Drill Bit Drill Bit
Level