Cisco RSP1 Installation And Configuration Manual page 31

The server creates a default boot filename as part of the automatic configuration processes. To form
the boot filename, the server starts with the name cisco and adds the octal equivalent of the boot field
number, a hyphen, and the processor-type name. Table 7 lists the default boot filenames or actions
for the processor.
A boot system configuration command in the router configuration in NVRAM overrides the
Note
default netboot filename.
Table 7 Default Boot Filenames
Action/File Name Bit 3 Bit 2 Bit 1 Bit 0
Bootstrap mode 0
Default software 0
cisco2-RSP 0
cisco3-RSP 0
cisco4-RSP 0
cisco5-RSP 0
cisco6-RSP 0
cisco7-RSP 0
cisco10-RSP 1
cisco11-RSP 1
cisco12-RSP 1
cisco13-RSP 1
cisco14-RSP 1
cisco15-RSP 1
cisco16-RSP 1
cisco17-RSP 1
Bit 8 controls the console Break key. Setting bit 8 (the factory default) causes the processor to ignore
the console Break key. Clearing bit 8 causes the processor to interpret the Break key as a command
to force the system into the bootstrap monitor, thereby halting normal operation. A break can be sent
in the first 60 seconds while the system reboots, regardless of the configuration settings.
Bit 9 controls the secondary bootstrap program function. Setting bit 9 causes the system to use the
secondary bootstrap; clearing bit 9 causes the system to ignore the secondary bootstrap. The
secondary bootstrap program is used for system debugging and diagnostics.
Bit 10 controls the host portion of the IP broadcast address. Setting bit 10 causes the processor to
use all zeros; clearing bit 10 (the factory default) causes the processor to use all ones. Bit 10 interacts
with bit 14, which controls the network and subnet portions of the broadcast address.
Table 8 shows the combined effect of bits 10 and 14.
0 0 0
0 0 1
0 1 0
0 1 1
1 0 0
1 0 1
1 1 0
1 1 1
0 0 0
0 0 1
0 1 0
0 1 1
1 0 0
1 0 1
1 1 0
1 1 1
Route Switch Processor (RSP1) Installation and Configuration
Reference Information
31