Mounting the unit
5
Mounting
Mounting methods
• Control lever IQAN-LM can be mounted by screws into the flange or fastened with
a clamp ring.
N
OTICE
The clamp ring must be positioned a maximum of 10 mm under the flange.
Mounting the IQAN-LM with a clamp ring.
• Control lever IQAN-LL must only be mounted using screws through the flange.
4x
Mounting the IQAN-LL with screws.
Please refer to the IQAN-Lx installation sheet for mounting dimensions.
Instruction book, IQAN- Lx
xii