How To Change The Pin; Power Off Procedure; Steering Lock - Cake OSA Series Manual

2.3 How to change the PIN

We advise you to change the PIN to personalize your bike and avoid it from
getting stolen.
Once the PIN has been changed, write it down and don't lose it. If you would lose
or forget your PIN code has to be reset by the Cake service team.
Your PIN can consist of either 3 or 6 digits. The available digits are 1, 2, or 3. A PIN
can for example be "131", "113", "132212" or "123321".
1) In the "ENTER YOUR PIN" screen, hold button 2 and 3 (middle and lower)
simultaneously for 5 seconds
2) Enter the current PIN (factory default = "123")
3) Enter your new PIN
4) Enter your new PIN again to confirm
5) Your new PIN is now set, please restart the bike to make sure it works.

2.4 Power off procedure

Follow the below procedure to safely power off your ÖSA.
1) Press and hold the power button on the display for 2 seconds to de-activate
the bike. The de-activation procedure can only be initiated when the
motorcycle is not running.
2) Turn off the battery by pushing the ON/OFF button on the right side of the
battery.
The "Power off" procedure can only be initiated when the motorcycle is not
running.
Turn off the battery by pressing the button on the right side of the battery.

2.5 Steering lock

When leaving the bike unattended, always use the steering lock as a safety
precaution.
The steering lock is engaged by using the bike-specific key that was sent along
with the bike. The steering lock is located in front of the bike, on the left side of
the main beam, above where the front fork connects to the main beam. To
activate the lock, pull the handlebar so it angles to the left while twisting the key.
When the key is removed, the handlebar should have some play but still have a
limited range of motion.
Apart from the steering lock, CAKE always recommends all our customers to invest
in a proper and approved chain and lock for motorcycle use to prevent your bike
from being stolen.