Crosley Lydia Mirrored Bathroom Wall Cabinet CF7005 Assembly Instructions Manual page 4

Hold the Support Plate (2) in the desired location of the wall unit. This plate will be about 2-1/2"
lower than the top of the wall unit. Making sure the Support Plate (2) is level, use a pencil to
mark the anchor locations using the Support Plate (2) screw holes as a guide. We recommend
using a leveler to make sure the Support Plate (2) is oriented correctly.
-Drill two 11/32" holes in these marked spots and tap the Wall Anchors (E) into the drilled holes.
Secure the Support Plate (2) to the Wall Anchors (E) with Screws (D). See Image.
-Mount the completed unit onto the Support Plate (2). The back of the unit has a recessed
area that will hook on to the Support Plate (2). Use a pencil to mark the 2nd set of anchor
locations using the holes in the wall unit as a guide. See Image.
-Remove the wall unit and drill two 11/32" holes at the pencil marks, and tap the Wall Anchors
(E)into the holes.
-Remount the wall unit and secure it to the Wall Anchors (E) with Screws (D). See image.
3 of 5