Items Included With The Brocade Dcx 8510-8 - Brocade Communications Systems Backbone DCX 8510-8 Hardware Reference Manual

Items included with the Brocade DCX 8510-8

2. Use a pallet jack or other assisted lift to transport the new chassis to the installation area. Doorways
must be wider than 36 in. (91 cm) to accommodate the chassis.
3. Remove the 14U Rack Mount Kit, accessory kit, packing foam, and antistatic plastic from the
chassis and set aside.
4. Remove the chassis door from the Brocade DCX 8510-8.
5. Remove the cable management comb.
6. Use a lift to raise the chassis to the correct level. If installing the chassis in a cabinet, follow the
instructions provided by the rack kit manufacturer.
7. If applicable, lock the wheels of the lift.
8. Gently slide the chassis onto the final installation surface, ensuring that it remains supported during
the transfer.
9. Ensure that the chassis is oriented so that the nonport side has access to intake air (cool).
10. R einstall the cable management comb.
11. R einstall the door. The door must be installed to meet EMI compliance.

Items included with the Brocade DCX 8510-8

The Brocade DCX 8510-8 ships with the following:
• Brocade DCX 8510-8 chassis, populated with:
‐
‐
‐
‐
‐
‐
‐
‐
‐
‐
‐
• Accessory kit containing the following items:
‐
‐
‐
‐
• 14U Rack Mount Kit with instructions (includes rear brackets and bottom support rails)
Order the Brocade-branded optical transceivers (SFP+, mSFP, and QSFP). The Brocade DCX 8510-8
supports SWL, LWL, and ELWL transceivers. The mSFPs and QSFPs are SWL transceivers only.
26
NOTE
The Brocade DCX 8510-8 packaging does not incorporate a wood pallet and pallet
brackets. The chassis sits on top of a plastic shipping tray.
Control processor blades (CP8)
Core switch blades (CR16-8)
Port blades, application blades, and encryption blades (included based on customer
specification)
Blade slot filler panels (for slots not filled by blades)
WWN cards
WWN bezel (logo plate)
Power supplies
Power supply filler panel (included if there are fewer than four power supplies)
Blower assemblies
Cable management comb
Chassis door
Brocade DCX 8510-8 Backbone QuickStart Guide
ESD grounding strap
USB device
RS-232 serial cable. The RS-232 cable has an adapter at one end that can be removed to
provide an RJ-45-style connector.
Brocade DCX 8510-8 Backbone Hardware Reference Manual
53-1002180-08