Cable Routing Table - Brocade Communications Systems Backbone DCX 8510-8 Hardware Reference Manual

020f00 021fda 021fdc 021fe0 021fe1
5 Nx_Ports in the Fabric}
switch:admin> switchshow
switchName: rsl8-st03-dcx-01
<output truncated>
switch:admin> fabricshow
Switch ID Worldwide Name Enet IP Addr FC IP Addr Name
<output truncated>
switch:admin>lscfg --show
Created switches: 128(ds) 1 2(bs)
Port
-------------------------------------------------------------------
FID
<output truncated>
switch:admin>
2. Determine any differences between the information in the SANafter.txt file and the information in the
SANbefor.txt file created earlier. In particular, look for differences in the following:
• Device types
• Number of devices
• ISL and port states
• Number of switches in the fabric
3. Resolve any issues or unintentional changes to the Brocade DCX 8510-8 or fabric:
• If there are any mechanical problems, try reseating the associated component.
• If the configuration information is not correct for the Brocade DCX 8510-8, modify as required.
• If other issues exist, contact your support provider.

Cable routing table

The following table is a 64-port template for a cable routing table. Make copies of the table to cover the
total number of ports in the Brocade DCX 8510-8.
TABLE 16
Slot/port
Slot
Brocade DCX 8510-8 Backbone Hardware Reference Manual
53-1002180-08
0 1 2
1 | 1 | 1 | 1 | 1 | 128 | 128 | 128 | 128 | 128 |
Cable routing table for Brocade DCX 8510-8 (64 ports shown)
Cable labels
Port Switch end Device end
0
1
2
3
4
5
6
7
8
9
3 4 5 6 7
Connected device
Cable routing table
8 9
Slot/port of device
123