Polycom iPower 900 Series Installing Manual page 7

Removing the
Premier Cart
from the Pallet
Attaching the Ramps
While the Premier Cart is still on the pallet, remove the plastic wrap
surrounding it. Be careful not to scratch the cart.
The two wooden ramps are shipped with bolts already installed.
To attach the ramps to the pallet:
1. Slide the two wooden ramps, with bolts attached,
under the Premier Cart.
2. Turn the ramps over so that the bolts are on the bottom.
3. Align the bolts with the holes
insert the bolts into the holes.
Make sure the ramps can't slip off the pallet.
R e m o vi n g t h e P r e mi e r Ca r t f r o m t h e P all e t
on the edge of the pallet, and
b
a
b
out from
a
7