Polycom iPower 900 Series Installing Manual page 10

I N STA LL I N G A C O LL A B O RATI ON S Y STE M ON T H E P RE M IER CART
Installing the Front Bracket on the Monitor
Installing the Back Brackets for the 27-inch (29-inch in Europe)
Monitor
10
To install the front bracket on the cart:
1. Place the bracket on the Premier Cart so that the clamps on the
bracket align with the cutouts on the top of the cart
2. Pull the bracket forward until the hole for the screw on the bracket
aligns with the hole in the cart
3. Use a Phillips screwdriver and the screw provided to secure the
bracket to the top of the Premier Cart.
a
Before you begin, note that you must follow these instructions
e xa c t ly to ensure that the monitor is installed safely.
If the brackets are not correctly installed, the straps won't
hold the monitor securely in place. The monitor could work
free of the front bracket, and tip.
.
b
a
b
Warning
.
a