Polycom iPower 900 Series Installing Manual page 11

To install the back brackets for the 27-inch (29-inch in Europe)
monitor:
1. Determine which size monitor you have.
If you have a 32-inch (34-inch in Europe) monitor, go to the
"Installing the Back Brackets for the 32-inch (34-inch in Europe)
Monitor" section on page 12.
2. Position the Velcro straps
loop side of the Velcro facing up.
You don't need to separate the loop side from the hook side.
3. Place the brackets on top of the straps, aligning the holes in the
brackets with the holes in the Velcro straps and the holes in the
grooves on the cart. Make sure that the loose ends of the straps
b
extend beyond the rear of the Premier Cart.
The two holes in the brackets must be aligned with the 5th and
7th holes counting from the back of the cart (the brackets will
cover the 6th hole).
4. Insert the screws through the brackets and straps and into the
Premier Cart. Tighten the screws.
To continue the installation of your monitor, go to page 13,
"Positioning the Monitor on the Premier Cart . "
a on top of the cart, as shown, with the
b
a
I n s t alli n g t h e M o n i t o r
11