Advertisement
Instrument
V Phase C Demand
Max
Min
Mean
V Phase AB Demand
Max
Min
Mean
V Phase BC Demand
Max
Min
Mean
V Phase CA Demand
Max
Min
Mean
Frequency Demand
Max
Min
Mean
MISCELLANEOUS METERS
to view
Start Alarm
Count
Target
Date
Time
Waveform Recs
Fault Recs
Event Recs
Data Log Recs
Setting Group
BINARY INPUT METERS
to view
BI 1-6
BINARY OUTPUT METERS
to view
BO 1-8
VIRTUAL METERS
to view
V 1-8
COMMUNICATION METERS
to view
COM1
COM2
COM1 TRAFFIC
COM1 Tx1
COM1 Rx1 Error
COM1 Rx1
©2013 Siemens Protection Devices Limited
Displays the Voltage demand based on Vc.
0.00V
0.00V
0.00V
Displays the Voltage demand based on Vab.
0.00V
0.00V
0.00V
Displays the Voltage demand based on Vbc.
0.00V
0.00V
0.00V
Displays the Voltage demand based on Vca.
0.00V
0.00V
0.00V
Displays the Frequency demand.
0.000Hz
0.000Hz
0.000Hz
This is the sub-group that includes indication such as the relays
time and date, the amount of fault and waveform records stored in
the relay TEST/RESET
Count of configurable type of Relay starts
0
100
01/01/2000
This meter displays the date and time and the number of Fault
records and Event records stored in the relay
22:41:44
0
0
0
0
1
This is the sub-group that includes all the meters that are
associated with the Binary inputs TEST/RESET
to this sub-group
---- --
Displays the state of DC binary inputs 1 to 6 (The number of binary
inputs may vary depending on model)
This is the sub-group that includes all the meters that are
associated with the Binary Outputs TEST/RESET
to this sub-group
---- ----
Displays the state of DC binary Outputs 1 to 8. (The number of
binary outputs may vary depending on model)
This is the sub-group that shows the state of the virtual status
inputs in the relay TEST/RESET
group
---- ----
Displays the state of Virtual Outputs 1 to 8 (The number of virtual
inputs will vary depending on model)
This is the sub-group that includes all the meters that are
associated with Communications ports TEST/RESET
access to this sub-group
X
Displays which com ports are currently active
Displays data traffic on Communications Port 1
0
0
0
Chapter 2) 7SR158 Settings and Instruments
Description
allows access to this sub-group
allows access
allows access to this sub-
Chapter 2 Page 11 of 16
allows access
allows
Advertisement
