Download Print this page

Siemens 7SR158 Argus Technical Manual page 133

Voltage and frequency relay

Advertisement

Binary Output Status Points
Static (Steady-State) Object Number: 10
Change Event Object Number: 11
Control Relay Output Blocks (CROB) Object Number: 12
Binary Output Command Event Object Number: 13
Static Variation reported when variation 0 requested: 1 (Binary Output w/o status)
Change Event Variation reported when variation 0 requested: 1 (Binary Output Event w/o Time)
Command Event Variation reported when variation 0 requested: 1 (Command Status w/o Time)
Point
Name
FW#
Index
(Description)
113 User DP Command 7.
114 User DP Command 8.
5.3.4 Counters
The following table lists both Binary Counters (Object 20) and Frozen Counters (Object 21). When a freeze function
is performed on a Binary Counter point, the frozen value is available in the corresponding Frozen Counter point.
The default Binary Counter and Frozen Counter event buffer sizes are set to 30.
The "Default Deadband," and the "Default Change Event Assigned Class" columns are used to represent the
absolute amount by which the point must change before a Counter change event will be generated, and once
generated in which class poll (1, 2, 3, or none) will the change event be reported.
The default counter event buffer size is set 30. The counter event mode is set to Most Recent, only most recent
event for each point is stored.
Counters are by default returned in a class zero interrogation.
Note, not all points listed here apply to all builds of devices.
© 2013 Siemens Protection Devices Limited
or 2 (Binary Output with status)
or 2 (Binary Output Event with Time)
or 2 (Command Status with Time)
Default
Change
Default
Default
Event
Variation
Variation
Assigned
Static
Event
Class
Object 10
Object 11
(1, 2, 3
or none)
0
2
2
0
2
2
Chapter 4) 7SR158 - Data Communications
Default
Command
Default
Event
Variation
CROB
Object 13
Command
Supported
Assigned
Event
Operations
Class
Object 13
(1, 2, 3
or none)
Latch On
Latch Off
Close
Trip
Pulse On
Pulse Off
Latch On
0
1
Latch Off
Close
Trip
Pulse On
Pulse Off
Latch On
0
1
Latch Off
Close
Trip
Chapter 4 - Page 51 of 66
Default
CROB
Operations
Pulse On
Pulse Off
Pulse On
Pulse Off

Advertisement

loading