Advertisement
Chapter 4) 7SR158 - Data Communications
OBJECT
Object
Variation
Number
60
4
80
1
Note 1: A Default variation refers to the variation responded when variation 0 is requested and/or in class 0, 1,
2, or 3 scans. Default variations are configurable; however, default settings for the configuration parameters are
indicated in the table above.
Note 2: For static (non-change-event) objects, qualifiers 17 or 28 are only responded when a request is sent with
qualifiers 17 or 28, respectively. Otherwise, static object requests sent with qualifiers 00, 01, 06, 07, or 08, will be
responded with qualifiers 00 or 01. (For change-event objects, qualifiers 17 or 28 are always responded.)
Note 3: Writes of Internal Indications are only supported for index 7 (Restart IIN1-7).
Chapter 4 - Page 42 of 66
Function Codes
Description
(dec)
22 (assign class)
1 (read)
Class 3 Data
20 (enbl. unsol.)
21 (dab. unsol.)
22 (assign class)
1 (read)
Internal Indications
2 (write)(see note 3)
No Object
13 (cold restart)
(function code only)
No Object
14 (warm restart)
(function code only)
No Object
23 (delay meas.)
(function code only)
No Object
24 (record
(function code only)
current time)
REQUEST
(Library will parse)
Qualifier Codes
(hex)
06 (no range, or all)
07, 08 (limited qty)
06 (no range, or all)
00, 01 (start-stop)
00 (start-
stop) index=7
© 2013 Siemens Protection Devices Limited
RESPONSE
(Library will respond with)
Function
Qualifier Codes
Codes
(hex)
(dec)
129
00, 01 (start-stop)
(response)
Advertisement
