Advertisement
Quick Links
Antiqued Paneled Mirror: Heart
Mounting Instruction
HARDWARE INCLUDED:
(2) Screws
(2) Anchors
Note: The provided mounting hardware is meant for
drywall and stud construction only. For other wall
types, please consult your local hardware store for
assistance in selecting the appropriate hardware.
Mounting Instructions:
Measure the exact distance between the center
1
of D-rings.
3
Connect the two points (A, B) with a light pencil line. Use a level to ensure that the line is level.
4
Make two insertion marks (C, D) centered along the line using the measurement "a".
2016-05-30
TOOLS NEEDED (not included):
With the back of the item facing away from the wall,
2
hold it against the wall at a desired mounting
location. Mark two reference points (A, B) on the
wall as shown.
1 / 2
Advertisement
Related Manuals for PB TEEN Antiqued Paneled Mirror Heart
Summary of Contents for PB TEEN Antiqued Paneled Mirror Heart
- Page 1 Antiqued Paneled Mirror: Heart Mounting Instruction HARDWARE INCLUDED: TOOLS NEEDED (not included): (2) Screws (2) Anchors Note: The provided mounting hardware is meant for drywall and stud construction only. For other wall types, please consult your local hardware store for assistance in selecting the appropriate hardware.
- Page 2 Use a stud-finder to determine if there is a wall stud located at either insertion mark. Install the proper hardware, as shown below. Note that the head of each screw resides about 3/8” from the wall. For stud mounting: For non-stud mounting: Tips: The anchor is self-drillable.