Fuel Reservoir; Blade Adjustment - Case 3550 Operator's Manual

38

FUEL RESERVOIR

Extinguish all smoking materials and open flames
before checking and filling fuel reservoirs.
Never refuel with engine in operation.
Never use matches, cigarette lighters or torches as
a source of light near flammables.
Always use fuel that has settled. When transferring
fuel from the settling vessel to the machine reservoir,
use a pump equipped with a filter, using the 24 Volt
power socket.
It is recommended that the refuelling occurs at the end
of each day's work; this will prevent condensations
during overnight parking. Do not run-out of fuel; this will
cause the entry of air into the fuel system with
consequent need for a bleeding operation.
Fuel filter cap
Carefully read personal and machine SAFETY PRECAUTIONS (at the beginning of this manual)
DANGER
D350M0022

BLADE ADJUSTMENT

Angeldozer version
The blade tilt and pitch can be obtained by the upper
adjustment rod of the right or left link. Otherwise, when
he blade system is equipped with a hydraulic cylinder,
the manoeuvre is done by it. To obtain larger angles for
the blade, lengthen or shorten adjusting rod L through
rod M. In this manner, the pitch angle is changed as
well.
T
Bulldozer version
In the bulldozer version, with a blade tilt control
cylinder on the right side, tighten or loosen sleeve E
using bar T to move further.
L
M
D350M0090
E
D350M0091
3550