Advertisement
Installation Instructions
WARNING: Disconnect power and allow the unit to
completely cool before attempting any maintenance
or cleaning to reduce the risk of fire, electric shock,
or damage to persons.
WARNING: Servicing and product repairs should
only be undertaken by the manufacturer's approved
service agent or a similarly trained or qualified
person, using only exact manufacturer approved
spare parts.
WARNING: Do not install the heater directly
near a bathtub or shower. Any switches or
controls must not be within reach of a person in
the bathtub or shower.
CAUTION: The supplied hanging components
are designed for use with this heater only.
Improper use, or use for purposes other than
intended, may cause damage or injury.
WARNING: Means of disconnection must be
incorporated in the fixed wiring in accordance
with the wiring rules.
Figure 1
B
Model
A
DEP0500
16.7 in. (425 mm)
DNP0500
DEP1000
20.7 in. (525 mm)
DNP1000
DEP1500
24.6 in. (625 mm)
DNP1500
DEP2000
32.5 in. (825 mm)
DNP2000
NOTE: DEP models include built-in electronic control. DNP models
require a wall thermostat (sold separately).
C
B
A
B
4.4 in. (113 mm)
7.9 in. (200 mm)
6.4 in. (163 mm)
7.9 in. (200 mm)
6.4 in. (163 mm)
11.8 in. (300 mm)
8.4 in. (213 mm)
15.7 in. (400 mm)
SAVE THESE INSTRUCTIONS
IMPORTANT: The wall bracket supplied with the
heater must be used.
IMPORTANT: Do not install if the product is
damaged.
WARNING: In order to avoid overheating, do not
cover or obstruct the heater. Do not place clothes or
towels on the heater, or obstruct the air circulation
around the heater, for instance by curtains or
furniture, as this could cause overheating and a fire
risk.
Extreme caution is necessary when any heater is
used by or near children or invalids and whenever
the unit is left operating and unattended.
! NOTE: Ensure that the air can enter and leave
the heater freely, through the inlets at the bottom
and the outlets at the top.
Electrical Connection
WARNING: All wiring must comply with
National Electrical codes and local codes and
utility requirements. This installation should be
entrusted to duly qualified personnel where
required by law.
Connect the supply wire into a properly rated
electrical junction box.
! NOTE: Consult your local electrical code for
applicable wire gauge.
C
Advertisement
