Cisco 7513 Series Replacement Instructions Manual page 11

With the chassis positioned so the front is closest to the rack, insert the front of the chassis
Step 3
into the rack between the brackets, then slowly lower the chassis until it rests on the two
bracket ledges. (See Figure 5.)
Figure 5 Sliding the Chassis into the Rack (Shown with Card Cage Assembly and Blower Installed)
Step 4 Slide the chassis back into the rack along the ledges until the ears meet the front mounting
posts on both sides of the rack. (See Figure 5.)
Secure each ear to the rack-mounting post with two 10-32 x 5/8-inch, Phillips pan-head
Step 5
screws.
This completes the procedure for moving the chassis into the rack.
POWE R
A
POWE R
B
Cisco 7513 Chassis Replacement Instructions
Replacing the Chassis
11