Cisco 7513 Series Replacement Instructions Manual page 14

Replacing the Chassis
Caution
required system component. Removing the RSP2 while the system is operating will cause the system
to shut down or crash and might damage or destroy memory files.
Figure 7
a
b
14 Cisco 7513 Chassis Replacement Instructions
You must turn OFF the system power before removing or installing the RSP2, which is a
Ejector Levers and Captive Installation Screws
Processor
module
carrier guide
Captive
installation
screw
STOP!
on contact
Bottom ejector lever
Processor module
slot
c