Advertisement
COMMERCIAL DRYER SPECIFICATIONS
SINGLE DRYER SPECIFICATIONS
MODEL NUMBER
GENERAL INFORMATION
Stainless Steel Look Push Button console, white enamel drum,
porcelain finish top, powdered paint cabinet, front panel lock
blank factory installed, removable indoor lint filter, improved
meter case, 4-Way Venting
ELECTRICAL REQUIREMENTS
MOTOR
HEATER TYPE
HEATER/BURNER RATING
(Add 500 watts approx for motor on all dryer models)
OPERATIONAL AMPERAGE
(Does not include control or gas valve)
DIMENSIONS
SHIPPING WEIGHT (EST.)
DRUM VOLUME
* (height at meter case top) ***(height at dryer top panel)
** Burner orifices are available for manufactured, natural, mixed and LP gas with varying BTU ratings
• L P Conversion Kit: 49572
Power cords on electric models sold separately
▲
Energy information is available online at www.whirlpoolcommerciallaundry.com/products.
To Locate a Distributor Near You, Please Visit www.whirlpoolcommerciallaundry.com/distributor, or call 1-800-NO-BELTS
®Registered trademark/™Trademark of Whirlpool, U.S.A. ©2008 Whirlpool Corporation. All rights reserved.
AA806028
CEM2760TQ
Metercase Model
Accepts the Following
Payment Systems:
Coin Slide
Retrofit Coin Drop
Retrofit Card Reader
OPL
Push-to-Start
3-Wire Nominal
240/208-Volt, 60 Hz., A.C.
Standard 30 Amps Breaker/
Fuse Branch Circuit per Dryer
(Subject to Local Codes)
⁄
-HP Single Speed
1
3
Motor with Built-In
Overload Protector
5.9 Amps Max Rating
ELECTRIC
Heater Rated at 5600 watts
Motor — 4.0 Amps
No load
Heater — 23.33 Amps
@ 240-Volt 27.33 Total
43" H*, 27" W, 28.5" D
134 Lbs.
7.4 Cu. Ft.
TORX is a registered Trademark of Textron Industries, Inc.
Whirlpool Corporation • Benton Harbor, Michigan 49022 U.S.A.
CGM2761TQ
•
▲
Metercase Model
Accepts the Following
Payment Systems:
Coin Slide
Retrofit Coin Drop
Retrofit Card Reader
OPL
Push-to-Start
Nominal, 120-Volt, 60 Hz.,
A.C., Standard 15 Amps
Breaker/Fuse Branch
Circuit per Dryer
(Subject to Local Codes)
⁄
HP Single Speed
1
3
Motor with Built-In
Overload Protector
5.9 Amps Max Rating
GAS
**
22,000 BTU
Natural Gas
Motor — 4.0 Amps
No load
43" H*, 27" W, 28.5" D
135 Lbs.
7.4 Cu. Ft.
EXHAUST INFORMATION
All dryers require the equivalent of a 4-inch
diameter exhaust duct. Rigid metal duct is
recommended. Failure to properly exhaust
the dryer will result in improper operation.
27" & 29" Dryer Venting Requirements
of 90°
#
Turns
4" Hood
2
⁄
" Hood
1
2
Maximum Length of 4" Diameter Rigid
Metal Duct
0
64 Ft.
58 Ft.
1
54 Ft.
48 Ft.
2
44 Ft.
38 Ft.
3
35 Ft.
29 Ft.
4
27 Ft.
21 Ft.
Maximum Length of 4" Diameter Flexible
Metal Duct
0
36 Ft.
28 Ft.
1
31 Ft.
23 Ft.
2
27 Ft.
19 Ft.
3
25 Ft.
17 Ft.
4
23 Ft.
15 Ft.
Dimensions are for planning purposes only.
For complete information, see installation
instructions packed with product.
CWLL131
Advertisement
