Advertisement
17. Open the door of the Left Storage (C).
18. Place Top (E) on top of the Left & Right Storages (C& D), as seen in the illustration below.
19. Insert 10 sets of Bolt (H), Spring Washer (I) and Flat Washer (J) through the holes on the top interior of both the
Left & Right Storages (C&D) and then into the pre-fixed insert nuts underneath Top (E).
20. Tighten with Allen Key (K).
10 sets
21. Place the Top Front Molding (F) onto the top front of the Left and Right Storages(C&D), as seen in the illustration
below.
22. Insert 3 sets of Bolt (H), Spring Washer (I), and Flat Washer (J) through the pre-drilled holes on the top front of
the Left and Right Storages (C&D) and into the pre-fixed insert nuts on the Top Front Molding (F).
23. Tighten with Allen Key (K).
3 Sets
Date: 2013-May-7
Rev:
www.pbteen.com
Page 5 of 6
Advertisement
