Page 1
CHELSEA ARMOIRE ASSEMBLY INSTRUCTIONS www.pbteen.com Page 1 of 6 Date: 2013-May-7 Rev:...
Page 2
(H) Bolt (I) Spring Washer (J) Lock Washer (K) Allen Key ¼” x 1”– 25x ¼” – 25x ¼” – 25x M4 x110 x 30 -1x Tools Required (not included): Philips Head Screwdriver Date: 2013-May-7 www.pbteen.com Rev: Page 2 of 6...
Page 3
8. Insert from the bottom: 4 sets of Bolt (H), Spring Washer (I), and Flat Washer (J) through the pre-drilled holes on the top of Base (A), to the pre-fixed insert nuts on the bottom of the Left Storage (C). 9. Tighten with the Allen Key (K). Date: 2013-May-7 www.pbteen.com Rev: Page 3 of 6...
Page 4
15. Insert 6 sets of: Bolt (H), Spring Washer (I), and Flat Washer (J) through the pre-drilled holes on the left side panel of the Right Storage (D), to the pre-fixed insert nuts on the right side panel of the Left Storage (C). 16. Tighten with Allen Key (K). 6 Sets Date: 2013-May-7 www.pbteen.com Rev: Page 4 of 6...
Page 5
22. Insert 3 sets of Bolt (H), Spring Washer (I), and Flat Washer (J) through the pre-drilled holes on the top front of the Left and Right Storages (C&D) and into the pre-fixed insert nuts on the Top Front Molding (F). 23. Tighten with Allen Key (K). 3 Sets Date: 2013-May-7 www.pbteen.com Rev: Page 5 of 6...
Page 6
We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish. • Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if necessary. Date: 2013-May-7 www.pbteen.com Rev: Page 6 of 6...