Advertisement
Assembly Instruction Steps:
1. Remove the drawers from Base (A), as seen in the illustration below. Save the drawers for later use.
2. Carefully turn Base (A) on its back, as seen in the illustration below.
3. Insert the exposed screws of the Legs (B) into the pre-fixed mounting plates on the bottom of each corner of
Base (A).
4. Turn each Leg (B) clockwise until tight, as seen in the illustration below.
5. Turn Base (A) upright.
6. Place the Left Storage (C) onto the left side of Base (A), as seen in the illustration below.
7. Align the pre-drilled holes on the top of Base (A) to pre-drilled holes on the Left Storage (C).
8. Insert from the bottom: 4 sets of Bolt (H), Spring Washer (I), and Flat Washer (J) through the pre-drilled holes on
the top of Base (A), to the pre-fixed insert nuts on the bottom of the Left Storage (C).
9. Tighten with the Allen Key (K).
Date: 2013-May-7
Rev:
www.pbteen.com
Page 3 of 6
Advertisement
