PBteen Chelsea Assembly Instructions

Chelsea 6 Drawers Dresser
PRE-ASSEMBLY :
•
Please read all instructions before beginning assembly.
•
Two-adult assembly is recommended.
•
Save all packing materials until assembly is complete to avoid accidentally discarding
smaller parts or hardware.
PARTS INCLUDED:
A – Dresser (1pc)
B – Legs (4pcs)
C – Center Leg (1 pc)
D – Metal Knobs (12 pcs)
E – Metal Knobs Bolt (12pcs)
TOOLS REQUIRED (but not included):
Phillips Head Screwdriver
ASSEMBLY INSTRUCTIONS:
1. On a soft, scratch-free surface, such as a carpet or rug, remove all the parts from the boxes.
2. Determine the desired location of the Dresser (A). Insert the exposed screw of the Legs (B) into the pre-
drilled hole on bottom of each corner of the Dresser (A). Insert the exposed screw of the center leg (C)
into the drilled hole on the center bottom of the Dresser; turn clockwise until tight.
A
3. To attach the Metal Knobs (D) to the drawers hold Metal Knobs (D) over pre-drilled hole in drawer front,
screw the Metal Knob Bolt (E) through the interior of the drawer and into the Metal Knobs (D); tighten
using a Phillips Head Screwdriver.
CARE INSTRUCTIONS:
•
Avoid direct sunlight and excessive temperatures
•
Dust often using a clean, soft, dry and lint-free cloth
•
Waxing is not recommended on lacquered finish
B
C
1/2
www.pbteen.com
E D