Using The Exhaust Control; Changing Air Direction - Whirlpool AR0500XA Use And Care Manual

Using the Exhaust Control
The Exhaust Control draws stale or smoky
air from the room or circulates existing
room air.
NOTE: Make sure the Exhaust Control is
returned to the Closed setting when cooling
or room air circulation is desired. Energy
efficiency is decreased when operating in
exhaust and cooling at the same time.
To exhaust room air:
1. Set Exhaust Control to Open
2. If cooling is desired, set System Control
to desired Cool setting.
3. If cooling is not required, set System
Control to Fan Only.
To circulate room air:
1. Set Exhaust Control to Closed.
2. If cooling is desired, set System Control
to desired Cool setting.
3. If cooling is not required, set System
Control to Fan Only.
Changing air direction
The louvers, in the top grille area of the air
conditioner, control the direction of the
cooled air. Move the tab, at the top of the
grille, in the direction in which you want the
air to go (right, left, or straight ahead).
Tab