Using The Exhaust Vent Control; Changing Air Direction - Whirlpool ACS052XH1 Installation, Use And Care Manual

O P E R A T I N G Y O U R A I R C O N D I T I O N E R

Using the exhaust vent control

The Exhaust Vent Control draws stale or
smoky air from the room or circulates
existing room air.
To exhaust room air:
1. Set Exhaust Vent Control to OPEN.
2. Set Fan Control to desired setting. If no
cooling is desired, set Fan Control to High
Fan or Low Fan.
3. Set Thermostat Control to desired setting.
To circulate room air:
1. Set Exhaust Vent Control to CLOSED.
2. Set Fan Control to desired setting. If no
cooling is desired, set Fan Control to High
Fan or Low Fan.
3. Set Thermostat Control to desired setting.
NOTE: For maximum performance, the
Exhaust Vent Control must be in the
CLOSED position when cooling or room
air circulation is desired.

Changing air direction

The louvers, in the top grille area of the air
conditioner, control the direction of the
cooled air. Move the levers in the direction
you want the air to go (right or left).
14
EXHAUST
CLOSED OPEN
EXHAUST
CLOSED OPEN
Lever for left/right airflow