Using The Exhaust Vent Control; Using The Energy Saver Settings; Changing Air Direction - Whirlpool ACQ052 ACQ062 Use And Care Manual

Whirlpool room air conditioner use and care acq052 acq062
Hide thumbs Also See for ACQ052 ACQ062:
Table of Contents

Advertisement

.
__^_._.
Using the exhaust
vent control
The Exhaust Vent Control draws stale or
smoky air from the room or circulates
existing room air.
To exhaust
room air:
1. Set Exhaust Control to OPEN.
2. Set Fan Control to desired setting. If no
cooling is desired, set Fan Control to
FAN ONLY.
3. Set Thermostat Control to desired setting.
EXHAUST
VENT
1
OPEN
CLOSED
To circulate
room air:
I
1. Set Exhaust Control to CLOSED.
2. Set Fan Control to desired setting. If no
cooling is desired, set Fan Control to
FAN ONLY.
3. Set Thermostat Control to desired setting.
NOTE: For maximum performance,
the
Exhaust Vent Control must be in the
CLOSED position when cooling or room
air circulation is desired.
I
EXHAUST
VENT
(
OPEN
CLOSED
Using the energy
saver set :tings
Use the Energy Saver settings when you do
not want the fan to run continuously.
Using
these settings causes the fan to stop when
the compressor stops, and saves energy.
Set the Fan Control
to the desired setting.
LOW - for sleeping comfort
MED - for normal cooling
QUICK COMFORT - for fastest cooling
I
ENERGY
NORMAL
SAVER
FAN
Changing
air direction
The air direction louvers, in the top grille
area of the front panel, control the direction
of the cooled air. Move the tabs in the
direction you want the air to flow (right, left,
or straight ahead). A tab in the center of the
louver area (on some models) adjusts the
airflow up or down.

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

This manual is also suitable for:

Acq062

Table of Contents